Filter
Top Products
. . . the brew unit cannot be removed.
The brew unit can only be removed when the waste
unit has been taken out.
If the brew unit is still not removable, then it is not in
the right position.
^
Close the door and switch the machine on. The
brew unit will position itself correctly.
. . . the brew unit cannot be pushed into place in
the machine.
The brew unit is not in the right position. For this the
funnel must be set a little higher and the socket
standing vertically.
To position the brew unit correctly:
^ With your finger press on the snap lock a and
push the funnel downwards b.
^
Push the socket over to the left as far as possible
c.
^
Press once on PRESS.
The correct position as shown above is reinstated,
and the brew unit can be pushed into place in the
machine.
Problem solving
67