Filter
Top Products
^
Grasp the brew unit by the handle and press the
part marked PRESS with your thumb.
^
Carefully pull the brew unit out.
If this can only be done with difficulty, it is not
correctly positioned, (see "Problem solving
guide").
^
Clean the brew unit thoroughly under hot running
water without washing-up liquid.
Wipe any remaining coffee off the steel filters.
There is one filter inside the funnel and a second
one to the left of it. The second one can be
removed for cleaning (see "Cleaning the filters").
^ Dry the funnel area to prevent ground coffee from
sticking to it and affecting the next drink you
make.
^ Directly after cleaning, press the part marked
PRESS once.
^ Slide the brew unit back into the machine along
the guiding runners, without pressing the part
marked PRESS, until you hear it click into place.
Cleaning the steel filters
^
Wipe any remaining coffee off the steel filter in
the funnel of the brew unit to keep the machine
in good working order.
The steel filter to the left of the funnel can be
removed for thorough cleaning. Check it from time to
time to see if it is dirty and clean it whenever
necessary.
Cleaning and care
52