Filter
Top Products
Water hardness
The steam oven is set at the factory to water hardness setting
IV (Very hard 4). You can set the steam oven for the water
hardness level in your area.
You can use the test strip supplied to check the water
hardness level, or your local water supplier will be able to
advise you on the water hardness of your area.
The water hardness is shown as settings I to IV equivalent to
the German scale 1 to >21 °dH (0.2 >3.8 mmol/l).
Hardness level Hardness range Setting
I 1-7 °dH
(0.2-1.3 mmol/l)
Soft 1
II 8-14 °dH
(1.4-2.5 mmol/l)
Medium 2
III 15-21 °dH
(2.7-3.8 mmol/l)
Hard 3
IV >21 °dH (above
3.8 mmol/l)
Very hard 4
Display
The contrast and brightness can be adjusted.
Volume
The volume of the buzzer tones and also the keypad tone
which sounds each time a sensor is touched can be altered.
The keypad tone can also be switched off.
Safety
Once the setting under "System lock" has been changed to
"Permitted", you will be able to activate the system lock to
prevent the steam combi oven being switched on
unintentionally, by children for example.
Units
You can choose for the weight to be shown in kg or lbs, the
temperature in °C or °F and the depth/thickness in cm or
inches.
Settings
44