,
Installation work and repairs to electrical appliances
must only be carried out by a suitably qualified and
competent person in strict accordance with current local
and national safety regulations (BS 7671 in the UK).
Repairs and other work by unqualified persons could be
dangerous. The manufacturer cannot be held liable for
unauthorised work.
What to do if ...
... you cannot switch the appliance on.
Check whether the mains fuse has tripped.
If this is not the case, then disconnect the appliance from the
electricity supply for approx. 1 minute. To do this:
– switch off at the wall socket, or switch off at the isolator, or
– disconnect the mains fuse.
Reset the trip switch in the mains fuse box, and switch the
appliance back on. If it still will not switch on, contact a
qualified electrician or the Miele Service Department.
... the demo programme has been set.
The appliance will not heat up if demo mode has been set.
See "Settings / Showroom programme".
... the fan can still be heard after the appliance has been
switched off.
The appliance is fitted with a fan which removes steam from
the oven.
The fan will continue to run for a while after the appliance has
been switched off.
Problem solving guide
63