Filter
Top Products
... F and a number appear in the display.
This combination indicates a fault.
–
F 20: The appliance does not heat up.
Check whether the water container has been pushed right
into the appliance so that it connects.
Switch the appliance off and then back on again.
–
A fault message will appear if the temperature of the oven
compartment has not risen by at least 2 °C within
5 minutes of the start of the heating up phase. This can
occur if, for example, a large quantity of frozen food is
being prepared.
–
Lightly lubricate the coupling seal on the water container
with silicone grease, as described in "Cleaning and care /
Water container / Coupling seal".
– F 54: Fault - food probe short circuit.
Check whether the food probe has been inserted
incorrectly.
Switch the appliance off, remove the food probe and start
again.
– F 55: Fault - over-riding time
The maximum length of time for which the steam combi
oven can be operated on the Fan plus function has been
exceeded and so the appliance has switched itself off
automatically for safety reasons.
The steam combi oven can be used again immediately by
simply switching it off and back on again.
–
Other fault messages:
Switch the appliance off and call the Service Department.
Problem solving guide
66