Filter
Top Products
Time display
Before the program starts, the time
display shows the running time of the
selected program in hours and minutes.
During the running program the
remaining time shows in the time
display.
The running time for the same program
may vary depending on the intake
water temperature, load size and
soiling.
When a program is selected for the first
time, a time is shown which equals an
average program running time with
cold water.
The time values in the program guide
correspond to the program running
times with standard loads and
temperatures.
Each time a program is run, the
electronic adjusts the program running
time according to the intake water
temperature and the load size.
Glasscare indicator
The green Glasscare indicator lights
when a program is selected which
washes glasses especially gently.
Program sequence indicator
The current step of a wash program is
indicated by the program sequence
indicator.
At the end of a program
Once the program has been finished,
the time display shows 0 and the "End"
indicator lights.
Dishes tends to chip if removed still hot
from the dishwasher.
Let the dishware cool.
After turning off the dishwasher open
the door slightly. The dishes will cool
much faster.
^
Unload the dishwasher.
^
Turn the dishwasher off s.
The dishwasher continues to use
electricity until turned off with the s
button.
^ If the dishwasher is not used for a
longer period of time, e.g.
vacationing, turn off the water supply.
Use
31