Filter
Top Products
Features
Electronic controls
In addition to operating the various
cooking programmes to bake, roast
and grill, the electronic controls also
offer the following features:
–
Clock display
–
Minute minder
–
Timer to automatically switch cooking
programmes on and off with auto
-
matic use made of residual heat
– Programme lock, to prevent
unintentional altering of programme
settings
– System lock, to prevent the
appliance being used unintentionally
– Safety cut-out
Cooling system
As soon as the oven is switched on a
cooling fan is automatically engaged.
The cooling fan mixes hot air from the
oven cavity with cool room air before
venting it out into the kitchen through
vents located between the appliance
door and the control panel.
The controls and door handle will get
slightly warm. They are quite safe to
touch.
The cooling fan will continue to run for a
while after the oven has been switched
off to prevent any humidity building up
in the oven, on the control panel or in
the oven housing unit. When the
temperature in the oven has fallen
sufficiently the cooling fan will switch off
automatically.
Door contact switch
There is a door contact switch in the
right hand door hinge.
If the door is opened during operation,
the door contact switch causes the
oven heating, and the fan if a "Fan"
setting is being used, to be switched
off.
This helps reduce the amount of heat
lost from the oven cavity, e.g. when
basting a roast.
PerfectClean treated surfaces
The following surfaces are all treated
with PerfectClean enamelling.
– Oven interior
– Runners
– Baking tray
– Grill pan
– Anti-splash tray
– Rack
PerfectClean enamelled surfaces have
very good anti-stick properties and are
much easier to keep clean than
conventional enamel, if cleaned
regularly.
See "Cleaning and care" for more
information.
Description of the appliance
6