Filter
Top Products
^ Hook the inner glass pane into the
aluminium guides on the outer pane
and lower it into position.
Make sure when lowering the inner
pane that it does not come out of its
fixings.
After lowering it into position the inner
pane has to be pushed back into its
retainers.
This is easier to do if you push one side
into its retainer first and then do the
other side.
^ Finally using the ball of your hand
press down on the aluminium trim on
the inner pane to make sure it goes
back into position. You will hear a
very clear "click" when doing this.
The retaining pins are pushed back
out when you do this.
Before putting the door back on
make sure that the inner pane is
sitting correctly in its retainers and
that it cannot come loose and get
damaged.
Cleaning and care
61