Miele H 383 Convection Oven User Manual


 
Remove all accessories including
the runners and any extra acces-
sories such as, for example, the tele-
scopic carriage, from the oven interior
before starting the pyrolytic cleaning
process.
The high temperatures needed for pyro-
lysis will damage the accessories and
cause irreparable damage to the tele-
scopic carriage.
Use of heat-resistant oven gloves
is recommended when placing
food in the oven, turning or removing it.
When working with "Conventional" heat-
ing or when grilling, the element in the
roof of the oven gets very hot, and
there is a danger of being burnt.
When cleaning the roof of the oven
wait until the grill element has
cooled down before lowering it, to
avoid the danger of burning.
Do not use force to pull it down as
this can cause the element to
break.
Only use the Miele roast probe
(core temperature probe) supplied
with this appliance. If a replacement is
necessary it can be obtained from the
Miele Spare Parts dept. or a Miele spe-
cialist dealer.
After using do not remove the roast
probe until the oven interior is cool.
When not in use do not leave the
roast probe in the oven, especially
when grilling or using the pyrolytic
cleaning process. High temperatures
would damage it.
Do not use plastic containers.
They melt at high temperatures
and could damage the oven.
Do not heat up unopened tins or
jars of food in the oven, as press-
ure can build up and they may ex-
plode. This could result in injury or
damage.
Do not push pots and pans around
on the oven floor as this could
damage the surface.
Do not lean or sit on an open oven
door, or place heavy items on it.
This could damage the appliance.
Take care in the region of the hinges.
The oven door can support a maximum
load of 10 kg.
Cover any food which is left in the
oven to be kept hot. This avoids
the food drying out. It also prevents
steam condensing and possibly lead-
ing to moisture damage in the oven.
If food is left in the oven after cook-
ing, e.g. to take advantage of the
residual heat, turn the temperature se-
lector to the lowest setting. Leave the
function selector at the position set.
Do not switch the appliance off until the
food has been removed.
Moisture in the oven could lead to con-
densation forming on the control panel
and surrounding kitchen furniture and
drops of moisture collecting under the
worktop.
Condensation can:
damage the housing unit / worktop
lead to moisture damage in the oven.
Warning and Safety instructions
13