Filter
Top Products
Checking, altering and
cancelling times entered
Times which have been entered for a
process can be called up at any time.
Press the relevant button for the time
you wish to check, alter or cancel.
If times are programmed for several
processes, (e.g. the oven and each
front cooking zone) each process can
be seen by pressing briefly more than
once on the relevant button.
The number of times to press the but-
ton depends on the number of pro-
gramme steps entered:
Press once and the time entered for the
oven appears.
Press twice and the time entered for
the front left hob zone appears. This is
indicated by the "*" symbol.
Press 3 times and the time entered for
the front right hob zone appears. This
is indicated by the symbol "#".
To check
Press the button for the time to be
checked.
"f"
The start time of the cooking process
appears. This goes out as soon as the
process begins.
"g"
The display shows the duration of
cooking time, or the time left if the
programme has started.
")"
The end time for the cooking process
appears.
To change
Press the relevant button.
The indicator light in the "+/–" button
lights up.
Use the "+/–" button to enter the time
you require.
The "+/–" button indicator light goes out
when the newly selected time has been
accepted. The time of day appears in
the display.
Please note the following:
If a button is pressed, where the time
was not entered, but calculated auto-
matically by the system, the indicator
light in the centre of the "+/–" button
does not come on.
This time cannot be altered.
Cancelling the time
To cancel, press the appropriate but-
ton and use the "–" button to set the
time to "0:00".
Cancelling a cooking time also cancels
the beginning and end of cooking and
vice versa.
To cancel a programmed processes
Turn the oven function selector or the
hob zone control(s) to "0".
If there is a power cut all programmes
entered will be deleted.
Timer - use
37