Filter
Top Products
. . . "F" and a number appear in the
oven display field.
This combination indicates a fault
– If "F3" appears the core tempera-
ture (roast) probe has a fault.
Remove the probe from its socket
and the message will disappear.
– If "F6" appears the oven has auto-
matically switched itself off during
use. This is a safety feature to pro-
tect the oven if it has been operating
for an exceedingly long period. The
length of time depends on the oven
function selected.
The oven can be used again immedi-
ately by simply turning the oven func-
tion selector to "0" and then entering
the process again.
– If "F9", appears in the display, this
may mean that the maximum tem-
perature of the appliance has been
exceeded.
The appliance automatically switches it-
self off temporarily. As soon as the
temperature has fallen to an accept-
able level the fault message disap-
pears. The appliance switches itself
on again automatically.
If this fault message occurs re-
peatedly, please inform the Service
dept. Please quote the fault mess-
age.
– "F13": The door lock for the pyrolytic
function does not operate.
First turn the function selector to the
"0" position and then to "Light H".
After approx. 60 seconds the error
message will go out and "PYRO" and
the symbol "p" light up in the display.
After approx. 30 seconds the symbol
"p" flashes.
Turn the function selector to "0", the
oven is ready to operate again.
If you still cannot operate the oven or
if this error message occurs more fre-
quently call the Service dept.
– “F14”: The door lock for the pyrolytic
function does not open.
If an attempt was made to open the
door before the “p” symbol started
flashing to indicate the end of the py-
rolytic cleaning process push the
door properly shut and wait until the
“p” symbol starts flashing in the dis-
play. This releases the lock and the
oven door can now be opened.
If “F14” still appears in the display
this could be due to a defective com-
ponent. Call the Service Department.
– "F15": the pyrolytic process was in-
terrupted during the heat-up phase.
First turn the function selector to the
"0" position and then to "Light H".
After approx. 60 seconds the error
message will go out, and "PYRO" and
the symbol " p" light up in the display.
After approx. 30 seconds more the
symbol "p" flashes.
Turn the function selector to "0", the
oven is ready to operate again.
If you still cannot operate the oven or
if this error message occurs more fre-
quently call the Service dept.
Correcting minor faults
67