Filter
Top Products
Installing a cooker
The appliance must only be oper
-
ated when it has been built-in.
When installing the cooker:
–
There must not be a unit rear panel
fitted behind the cooker.
– If an interim shelf is fitted beneath
the oven, a cut-out is required as
close to the wall as possible to en
-
sure that there is sufficient ventilation
for the appliance.
The shape of the cut-out is not im
-
portant, as long as cut-out measures
at least 150 cm
2
.
Do not fit insulation material inside
the housing unit. This would hinder
the intake of air to cool the appli
-
ance.
H 373, H 383
^ Push the cooker into the housing unit
as far as the oven trim and align.
^
Open the oven door and using two
screws secure the oven to the side
walls of the housing unit through the
holes in the oven trim.
Installation - cooker and hob control unit
77