Filter
Top Products
– “F17”: The catalyser temperature
sensor is defective.
“F17” does not show constantly in
the display. It appears for approx. 10
seconds when the programme selec-
tor is turned to the “0” position.
The oven can still be used for normal
cooking programmes. However the
catalyser will not switch on and cook-
ing smells will therefore not be dis-
pelled during cooking.
As soon as the programme selector
is turned to “Pyrolytic .”, “F17” will
appear in the display. It is not
possible to start a pyrolytic cleaning
programme.
If the temperature sensor becomes
defective during pyrolytic operation
all heating elements will switch off
and “F17” will appear in the display.
The oven door cannot be opened
until the internal oven temperature
has dropped to below 280 °C and
the “p” symbol is flashing in the dis-
play.
– If any other fault message appears
in the display, this will need a ser-
vice visit. Please quote the fault
message.
. . . the timer display does not light
up when the oven is operating.
This is not a fault.
The display does not light up if the time
of day display has been switched off.
Press "f" and ")" at the same time.
"12:00" will appear in the display field.
. . . the time of day cannot be re-set
after a power cut.
This is not a fault.
Check whether the function selector is
still set to one of the functions. If it is,
turn it to the "0" position.
The time of day can now be re-set.
. . . the energy-save function is not
activated when cooking with the
roast probe or the timer.
This is not a fault.
Certain conditions must be fulfilled be-
fore the system controlling the energy-
save function comes into operation.
Sometimes these do not occur.
. . . the residual time indicator is not
activated when cooking with the
roast probe.
This is not a fault.
Certain conditions must be fulfilled be-
fore the system controlling residual
time comes into operation. Sometimes
these do not occur.
Correcting minor faults
68