IMPORTANT SAFETY INSTRUCTIONS
11
Proper installation
The dishwasher must be install
ed and connected in compliance
with the installation plan.
Be car
eful when installing the dishwasher. Wear protective
gloves to avoid injury on any sharp metal components.
The dishwasher must be corr
ectly aligned horizontally to ensure
problem-free operation.
In order to ensure stability, built-under and integrated dishwash‐
ers must only be installed under a continuous counter which is se‐
cured to adjacent cabinetry.
If you want to convert your freestanding dishwasher to a built-un‐
der ("U") model, you will need to order the appropriate conversion
kit. If you remove the existing toe-kick, you must replace it with a U-
model plinth. This is necessary to avoid the risk of injury caused by
protruding metal parts.
The door spring
s must be adjusted equally on both sides. They
are correctly adjusted when the door remains stationary when left
half open (approx. 45° opening angle). It is also important that the
door cannot fall open.
The appliance may only be used with correctly adjusted door
springs.