Filter
Top Products
Options
45
Open the door if you need t
o check
how long the delay period has left to
run.
The time up until the program starts will
count down in the display in hours for
dur
ations above 10 hours, and in mi‐
nutes for durations below 10 hours.
When the set time is reached, the pro‐
gr
am selected will start automatically.
The time remaining will appear in the
time display and the indicator light
will go out.
How the Delay Start time is shown in
the display:
up to 59 minutes:
e.g., 30 min
utes = .
1 hour up to 9 hours 30 minutes:
e.g., 5 hours = .
over 10 hours:
e.g., 15 hours =
If you open the door during the delay
star
t time, you must then press the
program selection button and close
the door within four seconds in order
to continue the delay start time.
Starting a program before the delay
star
t time has elapsed:
A program can be started before the
delay star
t period has elapsed.
Proceed as follows:
Open the door
.
T
urn the dishwasher off with the
button.
T
urn the dishwasher on again with
the button.
Select the program you want.
S
tart the program by closing the door
within four seconds.
The Optical Interface comes on to show
that a pr
ogram has been started.
If you do not close the door within
four sec
onds, the indicator light of
the selected program and the time
display will flash.
The program cannot be started until
you
press the program selection but‐
ton and close the door within four
seconds.