Filter
Top Products
Operation
40
Turning off
At the end of a program:
Open the door
.
The dishwasher can be switched off
at any time using the
button.
Turning the dishwasher off during a pro‐
gr
am stops the program.
Turning the dishwasher off during the
run-u
p to a delay start time (FlexiTimer)
will also stop the process.
If the dishwasher is not going to be
used for a longer period of time, e.g.,
while
on vacation, the water supply
should be closed.
Unloading the dishwasher
Dishes tend to break and chip more
easi
ly when they are hot. Allow the
dishes to cool until they are comforta‐
ble enough to handle before unloading
them.
The dishes will cool much faster if you
open the door when the pr
ogram has
ended.
First unload the lower basket, then the
upper b
asket, and finally the cutlery
tray (depending on model).
This will prevent water drops from the
upper basket and cutlery tray from fall‐
ing onto the dishes in the lower basket.