Filter
Top Products
Frequently asked questions
64
Cleaning the water intake
A filter is incorporated in the screw con‐
nectio
n of the water intake valve. The
filter must be cleaned when dirty, other‐
wise insufficient water flows into the
wash cabinet.
The plastic hou
sing of the water
connection contains an electrical
component.
The housing must not be dipped in
water.
Recommendation
If the water supply contains a large
amount of insoluble substances, we
r
ecommend fitting a large-area filter in
the connection between the faucet and
the water intake hose threaded union.
This filter is available from a Miele deal‐
er or Miele Service.
To clean the filter:
Disconnect the dishwasher from the
electrical supply.
Switch off at the mains socket and
withdraw the plug.
T
urn off the water supply.
Unscrew the water intake valve.
Take the seal ring out of the screw
connection.
W
ithdraw the filter using pointed pli‐
ers and rinse clean under running
water.
Replace
the filter and washer, making
sure they are sitting correctly.
Reco
nnect the water intake valve to
the faucet, making sure it goes on
correctly and is not cross-threaded.
T
urn on the water supply.
If water leaks out, the screw connection
may not be conne
cted securely or it
may have been screwed on at an angle.
Unsc
rew and reconnect the water in‐
take valve correctly.