Filter
Top Products
Options
48
Factory default settings
If you have altered any settings from
the fact
ory default, you can reset them
back to the factory default settings as
follows:
Open the door
.
T
urn the dishwasher off with the
button, if it is turned on.
P
ress the program selection button
, and, simultaneously switch the
dishwasher on using the button.
Keep the program selection button
pressed in for at least four seconds
until the lower right program indicator
light comes on.
If this does not happen, start the proce‐
dur
e from the beginning again.
P
ress the
Short butt
on 19 times.
The Short
indicator light will flash once
at a long interval and then 9 times at
short intervals.
The flashing sequence in the display in‐
dicat
es whether a setting has been
changed from its factory default.
– : All setting
s are set to factory de‐
fault settings
– : A
t least one setting has been
changed
T
o reset the dishwasher to the factory
default settings, press the program
selection button .
The setting is now stored in memory.
T
urn the dishwasher off with the
button.