Filter
Top Products
Operation
26
How the hob is operated
The glass ceramic hob is equipped with
elec
tronic sensor controls which react
to finger contact. For safety reasons, in
order to switch the hob on, the On/
Off sensor needs to be touched for a
little longer than the other sensors.
A tone sounds each time a sensor is
touched.
Malfunction due to dirty and/or cov‐
er
ed sensors
If the sensors are dirty or covered
this co
uld cause them to fail to react,
to activate a function or even to
switch the hob off automatically (see
"Safety switch-off"). Placing hot
pans on the sensors/indicators can
damage the electronic unit under‐
neath.
Keep the sensors and indicators
clean and do not place anything on
t
op of them. Do not place hot pans
on them.