Filter
Top Products
Flush-fitted hobs
59
Preparing the worktop
Mak
e the worktop cut-out as shown
in "Building-in dimensions". Observe
the safety distances (see "Safety dis‐
tances").
Soli
d wood, tiled and glass worktops:
Fix the wooden frame 7 mm below
the top edge of the worktop (see dia‐
gram).
Connecting the mains connection
cable t
o the appliance
The mains connection cable must
on
ly be connected by a suitably
qualified and competent person.
Follow the instructions in the wiring
diagram (see "Electrical connection -
Wiring diagram").
Installing the hob
F
eed the mains connection cable
down through the cut-out.
Centre the hob in the cut-out.
Co
nnect the hob to the mains.
Check that the hob works.
Seal the r
emaining gap with a sili‐
cone sealant that is heat-resistant to
at least 160°C.
For natural stone worktops and natu‐
r
al stone tiles, only use silicone seal‐
ant that is specially formulated for
natural stone, and observe the seal‐
ant manufacturer's instructions.