Filter
Top Products
Safety instructions for installation
47
The appliance must on
ly be installed and connected to the electricity sup‐
ply by a suitably qualified and competent person in strict accordance with cur‐
rent national and local safety regulations.
Fit the wall units and cooker hood before fitting the hob to avoid damaging the
hob.
The vene
er or laminate coatings of worktops (or adjacent kitchen
units) must be treated with 100 °C heat-resistant adhesive which will
not dissolve or distort. Any backmoulds must be of heat-resistant
material.
The ho
b must not be installed over a fridge, fridge-freezer, freezer,
dishwasher, washing machine, washer-dryer or tumble dryer.
This ho
b must not be installed above ovens or cookers unless
these have a built-in cooling down fan.
Aft
er installation, ensure that nothing can come into contact with
the connection cable and that it is without hindrance.
The ele
ctrical cable may not come into contact with any moving
kitchen component (e.g. a drawer) or be subject to mechanical ob‐
struction which could damage it.
Ob
serve carefully the safety clearances listed on the following pa‐
ges.
All dimensions are given in mm.