Filter
Top Products
Water softener
The water softener must be set to corre-
spond to the water hardness in your
area. This can be obtained from your
local water company, or by using a test
kit that can be purchased from the
Miele Parts Department.
To avoid the build up of calcium de-
posits on dishes, cutlery, and in the
dishwasher, if the water hardness is
above 4 gr/gal, the water should be
softened.
The dishwasher is factory set for a hard-
ness level of 22 gr/gal. If your water is
harder or softer, the setting will need to
be adjusted.
To ensure a steady supply of soft-
ened water, the built in water sof-
tener must be:
1. Correctly set.
2. Reactivated with salt when depleted.
Where the water hardness fluctuates
(e.g. 8 - 17 gr/gal) always set the ma-
chine to the higher value (17 gr/gal in
this example).
Settings
gr/gal ppm °f
value
for
program-
ming
water
level
selector
(Setting)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22 *)
23
24
25
26
27
28
29
30
31
32
33
34
35
20
40
50
70
90
110
130
140
160
180
200
220
230
250
270
290
310
320
340
360
380
400
410
430
450
470
490
500
520
540
560
580
590
610
630
2
4
5
7
9
11
13
14
16
18
20
22
23
25
27
29
31
32
34
36
38
40
41
43
45
47
49
50
52
54
56
58
59
61
63
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
36-47 650- 850 65- 85 36 4
48-65 860-1170 86-117 36 5
66-70 1190-1260 119-126 36 6
*) factory setting
Water softener
11