Filter
Top Products
Cleaning the water inlet filter.
The water valve housing on the inlet
hose contains electrical compo-
nents and should not be immersed,
or run through water.
A filter is incorporated in the inlet hose
that is attached to the dishwasher’s
main shutoff valve. If your water supply
is hard, or the pipes contain sediment;
this filter may clog and prevent suffi-
cient water from entering the wash
cabinet. It can be cleaned as follows:
Cleaning the filter.
Disconnect the dishwasher from the
electrical supply (unplug it or shut off
the circuit breaker).
Turn off the main shutoff valve and
unscrew the inlet hose.
Carefully remove the rubber seal.
Remove the filter using needle nose
pliers and clean it by rinsing under
running water.
Replace the filter and seal. Make
sure they are seated correctly.
Screw the inlet hose back onto the
water valve, making certain it is not
cross-threaded.
Slowly turn on the valve and test for
leaks.
Cleaning and care
37