Filter
Top Products
Cleaning the spray arms.
On rare occasions particles of food
may get stuck in the spray arm jets.
They can be easily cleaned as follows:
Remove the lower basket and the
cutlery tray (if so equipped). The cut-
lery tray frame can be pushed back
in.
Unscrew and remove the upper
spray arm.
To remove the middle spray arm lo-
cated beneath the upper basket,
gently push upwards until it engages
in the ratchet
b, then unscrew it c.
Lift up on the lower spray arm to
remove it.
To clean the spray arms, use a
pointed object to push the the food
particles into the jets.
Rinse under running water to com-
plete the process.
After cleaning, replace the spray
arms.
Important:
After replacing the spray arms,
check that they rotate freely.
Cleaning and care
35