Filter
Top Products
6. Adjusting the door springs.
The door springs are adjusted correctly
when a half opened door remains in
that position when released.
If the door drops down, the springs
need to be tightened.
If the door closes, the springs need to
be loosened.
The adjusting screw is located in the
upper front strip, on the left hand side
of the dishwasher.
Open the dishwasher door.
Adjust the door springs to the cor-
rect balance:
– turn clockwise to tightened
– turn counterclockwise to loosen.
7.Securing the dishwasher
to the countertop.
To ensure the stability of the dish-
washer, it must be attached to the
countertop after it has been positioned.
Open the dishwasher door.
Using the screws provided, fasten
the dishwasher to the countertop
through the two holes located on the
upper rim.
The weight of the machine must be
supported by the legs, not the
countertop fastening screws. If
securing the top takes the weight
off of the legs, extend the legs
further until they are tight against
the floor.
Do not drill any additional holes
through any portion of the wash
cabinet. If in doubt about how to se-
cure the dishwasher, please call the
Miele Service Department.
Dishwasher installation
49