Filter
Top Products
Operating the dishwasher.
Turning on.
Close the door.
Open the water valve (if it is closed).
Press the “ON/OFF”-button (14).
When the program and temperature se-
lector knob (21) is in the “STOP” posi-
tion, a dot will light up in the display
field (17).
Starting a program.
Turn the program and temperature
selector knob (21) clockwise or
counterclockwise to the desired pro-
gram.
The length of the selected program ap-
pears in hours and minutes in the Time
display (17).
At the same time the indicator lamp
next to the “START”-button (18) illumi-
nates.
Before starting the program, addi-
tional features “Delay start” or “Top
Solo” can be selected (see “Addi-
tional features” on page 30).
Press the “START” -button (18).
The indicator lamp next to the “START”-
button will go out, and the program will
start.
Note.
The time displayed may vary using the
same program. When the dishwasher
is turned on, it will display a Wash time
calculated using a water supply tem-
perature of 60 °F/15 °C. (the tempera-
ture used for factory testing).
With subsequent programs the dish-
washer will recalculate the time accord-
ing to actual conditions. The most cur-
rent value will then be displayed the
next time the dishwasher is turned on.
The time remaining is displayed as the
program progresses.
To prevent children from coming
into contact with detergent, only
place it in the dispenser
immediate-
ly before starting the program.
Program end
The program has finished when no indi-
cator lamps are illuminated and a “0”
appears in the display. the dishwasher
can now be unloaded.
If the dishwasher door remains closed,
the drying fan will continue to operate
for a few additional minutes to help
dissipate any remaining moisture.
Operating the dishwasher.
28