Filter
Top Products
Before Use
Placing Food Inside
Operation Cleaning TroubleshootingOperation
24
1
Touch .
2
Touch
for about 3 seconds (until the buzzer sounds twice).
This function reduces freezing capability of the set compartment for the purpose of
power saving.
Can be set for the ice making compartment and the versa compartment.
If the ice making compartment is set to Power Save Mode, it is automatically set to "stop ice making." (Ice
cannot be stored.) Empty the water from the water tank as well as the water and ice from the ice tray and
the ice storage box, and then select Power Save Mode (the operation in "When not in use for a long time"
2
-
5
X
Page 30
).
Touch
to light up .
To cancel the setting
Set Power Save Mode
4
If is touched, is changed from blinking to staying
lit, and then the setting is fi nished
(the buzzer sounds twice).
If the ice making compartment is set to Power Save Mode, is displayed.
If 30 seconds pass without any operation panel operations, all displays turn off
without being set.
1
Select the versa compartment or ice making compartment,
and then touch
.
goes off when the setting is canceled.
If the temperature setting of the compartment is adjuested, the setting will be
canceled.
The cancellation can also be performed if
is selected after steps 1
and 2 of the setting procedure.
3
Touch to light up the compartment display that
you want to set.
The lit compartment is set to Power Save Mode.
The display changes each time the button is touched.
represents a blinking display. This is the condition where Power Save
Mode was canceled.
Power Save Mode
is canceled at the time of purchase.
*
This is a
display example
This will be
displayed during
Power Save
Mode.
4
1
3
2
Setting the Details
(Continued)