Filter
Top Products
26
Before Use
Placing Food Inside
Operation Cleaning TroubleshootingCleaning
Water supply pipe
Tank holder
Water supply
pipe
Tank holder
Packing
Aluminum
Pipe
Water supply
pipe
Tank
packing
Horizontally
Not to let
foreign objects
in
Clean the ice maker periodically to ensure that the ice is
pure and delicious.
Do not pour water into the tank
holder. Doing so may cause a
malfunction.
Rotate and remove the
aluminum pipe.
* White minerals or chlorine
accumulation may be adhered to
the parts, this is not abnormal.
Wash off such substances and
reuse the parts.
Push in the water supply pipe fi rmly
so that there is no unevenness.
Using the water supply pipe while
it is unevenly set may cause a
malfunction.
If the water supply pipe is not
installed, the food inside the
refrigerator compartment may freeze.
If the parts are not inserted
firmly or there are gaps due
to foreign objects, it may
cause abnormal noise or
prevent ice from forming. It
may also cause the water in
the water tank or food in the
refrigerator compartment to
freeze.
* If mold forms easily in the certain types of water,
clean about 2 or 3 times a week.
When using bleach to clean the water tank and lid,
follow the product instructions.
* Do not use a dishwashing machine, because it may deform the parts.
Prevents formation of water scale and mold.
Align the mark on
the water tank cap
with the mark on the
lid, and remove it.
Mark
2
Open the door of the ice
making compartment and
unlock the ice tray lock
lever.
When the ice tray lock lever is unlocked the display
turns on.
If the alarm sounds continuously when unlocking the
ice tray lock lever, lock the lever, close the door, wait for
the blinking
to turn off, and then perform operation 2.
Check that the blue light at the top left corner of the icon is
on.
1
Set to "STOP" ice making mode.
X
Page 17
6
Cancel "STOP" ice making mode.
X
Page 17
After washing the tray, dry off any moisture.
4
Empty the ice tray and wash it.
5
Push in the ice tray until it makes a
clicking sound, and then lock the ice tray
lock lever.
There is a risk of the water spilling.
Pull out the tray slowly.
3
Pull the ice tray
towards the front and
then remove it.
Lift slowly to
remove it
Easier to disassemble/
assemble when wetted
Check that is off.
If the lamp is on, check the setting status such as the position of the
ice tray lock lever and the up and down orientation of the ice try.
Ice tray lock lever is locked Ice tray lock lever is released
Ice tray
Water tank
Water supply pipe and tank holder
1
Remove the lid and wash it.
(Upper temperature limit about 60°C)
1
Pull out the water supply pipe and wipe
the tank holder with a clean cloth.
2
Disassemble and wash
the parts.
3
Follow the procedure in
reverse to return the parts
to their original positions.
4
Check that there are no foreign objects
between the water supply pipe and the tank
packing or tank holder.
month
once a
year
1~2 times
a
week
once a
Cleaning the Automatic Ice
Maker