Filter
Top Products
Chapter 2 – Installing the Router
28 MultiModem rCell User Guide
Optional – Attaching the Router to a Flat Surface
Before you mount your router to a permanent surface, verify signal strength. For more information, refer to Verify
Signal Strength in this chapter.
The router can be panel mounted with screws spaced according to the measurement shown.
Note: Use either #6 or #8 pan head screws for all four mount locations.
Setting TCP/IP Address
This section describes how to configure a TCP/IP address so the computer can communicate with the router.
1. From the Start menu, select Control Panel. In the window that opens, double-click Network Connections. The
Network Connections window opens.