Filter
Top Products
Chapter 3 – Using the Web Management Software
MultiModem rCell User Guide 51
Dial Prefix: Set the modem dial prefix. The default is ATDT.
Connect String: Set the modem Connect String. The default is CONNECT.
APN: Enter the APN (Access Point Name). The APN is assigned by your wireless service provider.
Init String 1-4: Configure the modem init strings. You can set up to 4 modem initialization strings.
Baud Rate: The Baud Rate option is only displayed on certain models and is set at 230.4K, by default. The default
setting is set for maximum performance. Setting the baud rate higher, particularly on the G2 models, is not
recommended as it may adversely affect the performance.
Submitting and Saving Your Changes
To save these settings, click Submit.
To ensure your changes go into effect, click Save and Restart.