Filter
Top Products
Chapter 3 – Using the Web Management Software
MultiModem rCell User Guide 57
2. On the PPP > Wakeup-on-Call screen, set up the following parameters:
Wakeup-on-Call Configuration
● Select Enable for Wakeup-on-Call.
● Set the Time Delay to 3 seconds. You can use the 10 second default.
● Ensure all Init Strings are empty.
● Submit Button
● Click the Submit button to save these settings.
Caller ID Configuration
● Enter the string RING to the Caller ID list.
● Click the Add Button to save the string to the Caller ID list.
3. To ensure your changes go into effect, click Save and Restart. The device saves all the settings and reboots
the computer.
Example 4 – Set Up the Ethernet Router to Activate on Matching Caller IDs Only:
1. On the PPP > PPP Configuration screen, set up the following parameters:
PPP General
● Make sure that PPP is Enabled.
● Make sure Dial-on-Demand is Enabled.
● Set the Idle Time Out to the number of seconds you desire.
Authentication
● Your wireless service provider may require you to have a separate PPP username and password. If so,
enter them here.
Note: If a username and password are required, your wireless provider likely gave you these items when
you activated your account.
Modem Configuration
● Make sure your Dial Number is entered correctly:
For GSM models, the Dial Number is *99***1#
For CDMA models, the Dial Number is #777