Filter
Top Products
The contents of the Resident System Program (default
value) are given below in the following Table 310.1:
Table 310.1
Resident System Program Contents
FUNCTION
DEFAULT VALUE
Recall
Button
Timing
Time is 0.4 sec.
Pause Timing
Time is 1.0 sec.
Paging Timeout
Time is 60 sec.
Hold Recall
Time is 60 sec.
System Refresh Basis
Based on no change in status
Day Mode CO/PBX Ringing Assignment
Stations 1 and 9 ring for all CO/PBX lines
Night Mode CO/PBX Ringing Assignment
Stations 7 and 9 will ring
Door Phone Assignment
Door Phone not assigned
Door Phone Chime Assignment
Stations 1 and 9 chime
Off Hook Ringing Assignment
Stations 1 and 9 ring
Internal Paging Zone Assignment
No stations in any zone
Attendant Station Assignment
1 and 9 are attendant stations
Prime Line Pick-Up Assignment
Not assigned
Prime Line Pick-Up for incoming Calls
No prime line on incoming calls
Prime Line Assignment
No private lines
CO/PBX Line Scan Assignment
Scan goes from CO/PBX line 2 to 1
CO/PBX Line Assignment
All lines are CO
PBX Access Code Assignment
PBX access code “9” is assigned
CO/PBX Group Assignment
All lines are group A
Station Class Assignment
All stations are class 0 (non-restricted)
“1” + Dialing Assignment
“1” + Dialing
Digit Rejection Assignment
No digits rejected
Speed Dial Toll Override Assignment
Toll restriction is overriden
Toll Restriction Override Table Assignment
No 3-digit codes in table
/ . ...\
Page 300-2