Filter
Top Products
4
-
dial telephone number
-
each digit is displayed as dialed [T]
-
depress I] Key
-
display goes Off
Note:
Each
Key
Telephone has 16 SPD buffers, 16 digits
each, available for its own use.
2.
To Program System Speed Dial
(Attendant Keyset Only)
-
depress -1 Key
-
record tone is heard over speaker
-
display shows [m
-
dial desired buffer number m]
-
record tone stops
- dial telephone number
-
each digit is displayed as dialed 171
-
depress
1 SPD PfiOG ]
Key
-
display goes off
Note
1:
The system is provided with 40 System Speed Dial
access buffers, 16 digits each. The access numbers
are 20 thru 59.
Note 2:
When programming station or System Speed Dial,
a pause may be inserted at any time. Each sequen-
tial depression of the pause key will increase the
duration of the pause. Each pause will count as a
digit.
Note 3: To reprogram a speed dial buffer, follow the same
instructions as programming. To erase a speed dial
buffer. follow the instructions for programming,
but don’t enter a telephone number.
3.
To Confirm Station Speed Dial Number
With Key Telephone Idle
-
-
-
depress Speed Dial Key ISPD]
depress desired B
display showsm number and each digit of the
stored number sequentially
4. To Confirm System Speed Dial Number
With Key Telephone Idle-
-
depress Speed Dial Key m
-
on keypad dial desired buffer 20 - 59
:. :.
~.
-
display shows buffer number and each digit of the
stored number sequentially
Note:
Display shows I] when there is no memory
in buffer.
410.10
Night Mode
1. To Enter Night Mode
With Key Telephone Idle
-
depress @
-
display shows I-I-]
-
on keypad dial 161,
181
-
display shows 1611
-
depress PI,
Fj
is lit
-
display shows ml for 10 seconds
2. To Cancel Night Mode
With Key Telephone Idle
depress @
display shows I--i_]
on keypad dial m’,
q
display shows 16181
depress [HOLDI, m goes out
Page 400-S