Filter
Top Products
Reset occurs at this time with the progrming station returning
to 'ton-line" mode.
230.2 Memory Block 9
1) Privacy Release Assignment (See Figure 340-27). Any
ccambination of cO/PBX lines can be selected to lose the privacy
feature. This enables up to four
stations to
join a
conversation with an outside party on the chosen CD/PBX line
without privacy. Parties attempting to enter after a fourth
party has entered will receive error tone.
The default value is
that all CD/PBX lines retain the privacy feature.
Address 1
buttons 1 r-
6 are used with each button representing its
corresponding CI/PBX line.
2) Hands-Free Telephone Assignment (See Figure 340-28).
With the introduction of the ET-a-( ) Key Telephone Sets this
area of the program is used to allow hands-free initiation of
intercom calls.
Addresses 2 and 3 are used with each of the
buttons l- 8 representing a station in each of the addresses.
The default value is that all stations are ET-&(
)
telephone
(without internal speakerphones).
3) Tandem Confererxe Assigrxnent (See Figure 340-29).
This area of the program is used to reserve a station position
to be used for tandem conferences. A tandem conferexe is an
-7-