Filter
Top Products
pm
SECTllON 400 STATION OPERATION PROCEDURE
410
Key Telephone Operation
410.1 CO/P5X (Outside Calls)
1. Originating
Using Manual Dialing
-
depress idle (unlit) m
-
-
-
a
-
-
-
-
lift handset or depress 3
q
-
receive dial tone
-
dial desired number
-
when party answers, use handset .to talk
Using Last CO/PBX Number Redial
Use of station or system Speed Dialing can automat-
ically seize an acceptable COjPBX line eliminating
the need to depress II CO/PBX
line. For 4 pnrticubu
CO/PBX line, depress CO before depressing the
Using Prime Line Pick-Up
- lift handset or depress ,$
III
-
receive dial tone
-
use any of the dialing methods discussed here
Note:
For consecutive dialing, depressing the Speed Din1
Key initiates speed dialing at any time. The keypad
is ah4ys live for manual dialing.
depress idle (unlit) ~
lift handset or depress s
tl
receive dial tone
2. Answering
depress Last Number Key
display shows m]
when party answers, use handset to talk
When a slow Flashing co is present on Keyset
-
depressing flashing
q
- lift handset
-
respond to caller
3. Placing a Call On Hold
Using Speed Dialing - Station and System
Placine a CO/PBX Call on Non-Exclusive Hold
-
-
-
depress Speed Dial Key m
-
display shows VI
depress idle (unlit) B
1
-
lift handset or depress s
q
receive dial tone
-
during CO/PBX conversation, depress [HOLDI once
-
display shows
m
or,
depress m for KM call. The ca3.l in progress will
automatically be put on hold.
For Station Speed Dialing
-
depress desired m
Note:
Depressing the page, door phone or pick-up buttons
will also automatically place the CO call on non-
exclusive hold and activate the selected feature.
or,
,
For System Speed Dialing
Placing a CO/PBX Call on Exclusive Hold
-
dial 20 - 59 for the particular number desired
-
during CO/PBX conversation, depress [HOLDI twice
display shows Speed Dial Buffer Number mj
-
-
display shows [m
Page 400-l