Filter
Top Products
--place programming overlay
(if avail&le) on
station keyset 1
--depress
overlay)
--depress
--depress
--depress
--depress
JTKEWCR[
key (or "MENU REFD OUT" a on
JON/OFF1
key (or
"EXIT" a on overlay)
m\ key (or 3 on overlay)
m key (or "RESTRICT" on overlay)
desired station select key (l- 16) to
be progranmzd
--depress desired line key(s) (lr-, 6) to be restricted
at selected station -
see note abve for LED status
irdication of the various restriction states
--repeat last two steps for each station being
progranxned
--depress 1-I key (or "EXIT" B on overlay)
5) System Reset Using Keyset.No. 1
--depress JADD/ONJ key (or "PlEbKJ FZAD CVI? a on
overlay)
--depress 1-1 key (or "EXIT" B on overlay)
--depress
q
--depress
q
--depress a
L-depress IDsss[
--keyset No. 1 is now in "on-line" mode
-
14 -