Filter
Top Products
1-11
Figure 1-2 Inside View of Fryer
1.5.2.1.1 Pilot Flame Adjustment - The pilot flame should be adjusted to produce the proper
millivolt output from the pilot sensing device. Millivolt output for the thermopile should be between
400 ± 50 millivolts. This procedure is only necessary on the manual pilot ignition system. Figure 1-
3 shows the pilot assembly with examples of the incorrect and correct pilot size. Example A illustrates
a pilot flame size that is too small to produce sufficient millivolt output. Example B is the correct size
for proper millivolt output.
AB
Figure 1-3 Pilot Assembly, Flame Adjustment
4
7
3
6
5
1
2