Pitco Frialator 7 Fryer User Manual


 
2-15
Crumb
Catcher
Filter Pump
Right Return
Valve
SHUT
Filter Tank
SHUT
Left Return
Valve
SHUT
Left Fryer Vat Right F ryer Vat
Right Drain
Valve
SHUT
Left Drain
Valve
OPEN
Right Recirc.
Valve
SHUT
Left Recirc.
Valve
DRAIN MODE
RETURN MODE
Crumb
Catcher
Filter Pump
Right Return
Valve
SHUT
Filter Tank
SHUT
Left Return
Valve
OPEN
Left Fryer Vat Right Fryer Vat
Right Drain
Valve
Left Drain
Valve
SHUT
Right Recirc.
Valve
SHUT
Left Recirc.
Valve
SHUT
Crumb
Catcher
Filter Pump
Right Return
Valve
SHUT
Filter Tank
OPEN
Left Return
Valve
SHUT
Left Fryer Vat Right Fryer Vat
Right Drain
Valve
Left Drain
Valve
SHUT
Right Recirc.
Valve
SHUT
Left Recirc.
Valve
SHUT
e. Slowly open the green handled drain valve
(3) for the tank being filtered. If necessary use
the clean-out rod (12) to clear the crumbs from
the drain. Use the long handled brush (14) to
clean the sides of the tank as the oil drains. If
you have the optional flush hose (9) go to step
i.
CAUTION
The filter tank can only hold the oil from one fryer.
DO NOT try to filter more than one fryer at a time.
CAUTION
NEVER turn on the filter pump unless the PRE-
HEAT FINISHED light (5) is on.
f. Open the red handled return valve (1) to the
tank you are filtering. When the tank is empty
close the green drain valve (3) and turn on the
filter pump. As the tank fills, brush the inside
of the tank to remove crumbs.
g. When bubbles are seen coming out of the oil
return spout turn off the pump. Open the
green handled drain valve (3) and allow the
tank to drain again. Repeat steps b through d
until the tank is clean.
h. When the tank is clean, drain the shortening
by opening the green handled drain valve (3).
Allow the shortening to circulate for approxi-
mately 2 minutes by returning oilto the fry
tank while it is still draining. This polishes the
shortening and cleans out the filter lines.
i. OPTIONAL FLUSH HOSE (9) - Connect
the flush hose to the quick disconnect (4).
Direct the flush hose nozzle into the tank
being filtered. Open the green handled drain
valve (3), the yellow handled flush hose valve,
and start the pump. Continue to rinse until all
the debris has been removed from the tank.
Turn off the pump and allow the tank to drain
to the filter. Close the yellow handled flush valve and disconnect the flush hose.
CIRCULATE MODE