Filter
Top Products
1) Temperature Selection for the Freezer Compartment
1-1) There are automatic temperature asettings of -2 for the freezer compartment and 38 for the fridge compartment
when initially applying electric power after installing refrigerator.
The numbers on the display represent the inside temperature of the refrigerator product. when the set
temperature and the displayed temperature are diffrent from each other, it will be automatically adjusted to the
set temperature. (actual display range of temperature : 15 ~ 80 for the fridge compartment and –25~80
for the freezer compartment)
when the freezer temperature is set, it will display the set temperature for the first 5 seconds. and then, it will
display its current temperature.
1-2) The temperature of the freezer compartment may be set to 6~ –14 by operating the temper
ature selection
button for the freezer compartment.
Selected in rotating sequence
2) Temperature Selection for the Refrigerator Compartment
2-1) The temperature of the refrigerator compartment may be set to 46
~ 34
by operation the temperature
selection button for the refrigerator compartment.
(Example:
38
36
34
Power Cool
46
44
….
38
)
2-2) Temperature that has been set for the freezer compartment/ the refrigerator compartment may vary by a little
difference depending on ambient temperature and user’s food storage style. (Take heed because if food would
contact too closely with refrigerator temperature sensor position, then under cooling overcooling may arise as
Freezer
Arctic Select Zone
(CF)
Fresh Select
Zone (CR)
Fridge
16
OPERATING INSTRUCTIONS & INSTALLATION
3-1) Digital Panel
3-2) Temperature Control Operation
-2-4 -14Power Freeze 68 -2
Note) If temperature in the freezer compartment is lower than 41
(when electric power is supplied again after
momentary electricity interruption / when electric power had been cut off for a short time by unstable electric
supply because of electricity supply line problem so as to be connected again, then the refrigerator judges it as
momentary power interruption. So the refrigerator reads again to use them after saving the temperatures and
the functions that had been set in EEPROM
14