Filter
Top Products
OPERATING INSTRUCTIONS & INSTALLATION
Key Functions After Converting to Option Mode
1) For example if you wish to shift the freezer compartment standard temperature down by 37.4°F by adjusting option,
you may proceed as follows. As this function is to change standard temperature, if current standard temperature of
the Freezer Compartment is -0.4°F and is lowered by 37.4°F by using the option, then standard temperature is
adjusted at -5.8°F. So in case where temperature option has been changed, internally it operates at actual standard
temperature -5.8°F even if it is set at -0.4°F on the panel. Therefore, adjusting standard temperature by 26.6°F
indicates that the temperature is adjusted down by 26.6°F from standard temperature that has been set on control
panel.
2) If the Arctic Select Zone Setting Key + Refrigerator Compartment Key is simultaneously pressed for about 12
seconds under normal operating condition, display is converted to an option setting mode.
3) After changing to option mode, display of "0" is lighted on the freezer compartment and refrigerator compartment
respectively. (Though it is supposed to be delivered from warehouse as such "0" for freezer compartment and "0" for
refrigerator compartment), the standard set values could have been changed during mass production for quality
improvement purpose, and delivered as such. )temperature display.
KEY FUNCTION
Refrigerator Compartment key
Fresh zone, Freezer keys
Freezer Compartment key
Arctic Select Zone key
ITEM DOWN
ITEM UP
OPTION VALUE DOWN
OPTION VALUE UP
Note) In principle, product is delivered from warehouse with all data for optional functions cleared.
Namely, it is delivered from warehouse with all set values set to "0". However, since some part of
set values could have been changed during mass production for quality improvement purpose,
please always confirm the quality information and so on.
OPTION VALUE DOWN KEY
OPTION VALUE UP KEY
ITEM DOWN KEY
ITEM UP KEY
VALUE ITEM
3333