Filter
Top Products
The Ice maker thermistor is located in its bottom.
The temperature signal is sent to the
micro-processor.
DISASSEMBLY AND REASSEMBLY
Ice-Maker Thermistor
The water Tank is located in the lower part of the
refrigerator. Before disassembling the Water Tank,
take out all shelves and cases located in front of the
Water Tank.
1. Unscrew the water tank(2 screws)to separate,
and lift it up.
Water Tank
Partition is located in the lower part of refrigerator. For
the disassembly of partition, water tank should be
disassembled first.
1. Unscrew the partition. (2 screws)
2. Insert the flat-tip screwdriver into the center groove
of the partition,and lift it up.
PARTITION IN THE Fridge
Thermistor cover
screw
Ductwork
Thermistor
Thermistor
(
ice-maker
)
Freezer Thermistor
The refrigerator thermistor is located inside of
the light cover of the refrigerator
1. Unscrew the upper left part of Ductwork, and
pull the projected part of the Thermistor cover
to separate.
2. Separate the housing which is inside of the
Thermistor cover,and replace the sensor.
5454