Filter
Top Products
OPERATING INSTRUCTIONS & INSTALLATION
4) If "6" is set as shown in the following option table for the freezer compartment after setting at "0" for the refrigerator
compartment, standard temperature of freezer compartment is lowered by -26.6°F. (Refer to the figure of temperature
change for freezer compartment)
: If you wait 20 seconds after completing the adjustment, the MICOM saves the set value on
EEPROM and returns to normal display and the option setting mode is canceled.
5) The above method of option change is applied to all models regardless of ICE DISPENSER/WATER attachment
without discrimination.
6) Temperature control of refrigerator compartment, water supply rate control, ice maker sensor temperature change, CR
compartment temperature control, etc. are available in the same manner as above.
7) Abstain from making random changes at your will except in special cases because every refrigerator product is
delivered from the factory with the option functions set in EEPROM. And if you change a setting option at your will,
don`s turn off electric power before recovery to normal display because the option function settings are only finished if
the display returns to normal 20seconds after your setting change.
1) Temperature Change Table for the Freezer Compartment
Note) Though there are other items adjustable by option, do not set options other than those of A/S
MANUAL contents because other items are related to refrigerator control functions. (please don’t
set options other than those shown in the A/S MANUAL contents.)
3434