Filter
Top Products
BULB
UVE
COLLAR
TO RE_OVE:
Open the door to the broil
stop position. Grasp the
door on each side and rift
up and off the hinges. #@
P_OT MFE THE #OOR
8Y THE HAN#LEo
BULB COVER
BAIL WiRE
TO REMOVE THE CO VE_:
t. Disconnect electrical power to the oven at
the main circuit breaker or fuse box.
2. Hold your hand under cover and firmly
push back the bail wire, until it clears and
releases the bulb cover.
REPLACE THE LSGHT BULB:
Unscrew the light bulb and replace it with a
40-watt home appliance bulb.
T@ REPLACE COVEE_:
_n
Place the bulb cover into the groove of the
bulb socket,
Pull the bail wire forward until it snaps into
the indentation on top of the bulb cover.
3, Reconnect the electrical power to the oven,
Do not touch a hot oven light
bulb. Do not touch a bulb with
wet hands or wet cloth.
Never touch the electrically
five collar on the bulb when
removing or replacing the
bulb. Do not remove any
screws.
_" When the door is remove_
and the hinge arms are in
the broil stop position, do
not bump into the hinge
arms. They could snap
back and cause injury to
hands and damage the porcelain finish
of the front frame. Cover the hinge arms
with empty paper towel rolls or towels
while working in the oven area.
TO REPLJ_CE:
Remove the paper towel
rolls or towels. Make sure
the hinges are still in the
broil stop position, Grasp
the door on each side.
Lift the door over each
hinge, Line the slots at
the bottom of the door
with the hinges. Sfide the
door down over the
hinges as far as it will go.
20