Filter
Top Products
continued
Your new control has a series of tones that will
sound at different times. These tones may
sound while you set the control for an oven
function, or at the end of the oven function. It
will also alert you there maybe a problem with
the functions. Below are the types of tones
and a brief description of each.
TO_ES WH#LE SETT#_G THE
CO_TROL
When you press a touch pad you will hear a
beep. This beep will let you know you have
placed enough pressure on the pad to
activate it. (The arrow pads do not beep.)
E_3D OF T#MED CVCLE TGE#E
At the end of a timed cooking function, you will
hear 3 short beeps followed by I beep every
6 seconds. This 6 second beep will continue
to sound until the C_.EA_OFF pad is pressed
or you may select the special feature to cancel
this 6 second beep from sounding at the end
of future cycles.
TO CA_3CEL THE 6 SECO_D BEEP
t, Press and hold the BA#_[E and B_OHL
pads, a* _the same ftHme for 3 seconds,
until the display shows "SF".
2. Press the _HTCHE_ TIIMER Oh#/OFF
pad. The display will show "COb,_ BEEP"
(continous beep).
Press the KBTCHE_ TIIMER O_/OFF
pad again. The display will show _'BEEP"
(beep canceled).
4. Press the START pad.
if you would like to retum the 6 second beep
repeat steps above until the display shows
your choice and press start.
A TTE_T#O_ T@_E
This tone will sound if you make an error or an
oversight is made while ,setting an oven
function.
Examples would be:
ao Setting a clean cycle and the oven door is
not properly closed.
bn
Cu
Setting a function and not pressing the
START pad.
Pressing an additional function pad
witf_out first setting a temperature or time.
Any of these can be quickly identified by
watching the display.
PECEHEA T TOPEE
When you set an oven temperature, the oven
automatically starts to heat. When the
temperature inside the oven reaches the
temperature you have set, a tone will sound to
let you know the oven is ready for baking.
If you set an oven function and the control
beeps while the display is flashing _'F" and a
number _F.4" or letter _F_" there may be a
problem with the control or oven. Simply
press the CLEA_JOFF pad and wait about
an hour. Try setting the function again. If tl_e
code repeats, write down the flashing code
and call for service. Tell the technician
what the code was flashing.
9