Filter
Top Products
8
Model 142Important: To the Operator
Section 5 Important: To the Operator
Figure 1
ITEM DESCRIPTION
1 Power Switch
2 Indicator Light - MIX LOW
3 Standby Switch
Symbol Definitions
To better c ommunicate in the International arena, the
words on many of our operator s witches and buttons
have symbols to indicate their functions. Your Ta ylor
equipment is designed with these International
symbols.
The following chart identifies the symbol definitions
used on the operator switches.
=ON/AUTO
=OFF
= WASH
Power Switch
The center position is the O FF pos ition. The left
position is WASH which activates the beater motor
only. The right position is the AUTO position, which
activates the beater motor and the refrigeration.
Indicator Light - MIX LOW
A mix level indicating light is located on the front of the
machine. When the light is on, it indicates that the mix
hopper has a low supply of mix. The hopper should be
refilled immediately. Always maintain at least 2” (5.1
cm.) of mix in the hopper. If mix is not added to the
hopper, the freezing c ylinder may freeze. This will
cause damage to the beat er as sembly and to the
freezer door.