Filter
Top Products
16
Model 142Operating Procedures
Standby
This unit is equipped with a STANDBY feature. If
product i s not dispensed for long periods of time (i.e.;
early morning hours), the STANDBY feature will
maintain the hopper and freezing cylinder product at
safe temperatures and prevent product b reakdown.
To use the Standby feature, perform the following
steps:
Note: Be sure your hands are clean and sanitized
before performing the following steps.
Step 1
Verify that the hopper is adequately filled with mix and
invert the feed tube.
Figure 29
Step 2
Place the power switch in the AUTO position, and
press the STANDBY button. The button will light,
indicating that the unit is operating as a refrigerator for
product in the hopper and freezing cylinder .
Step 3
To remove the unit from the STANDBY mode, place
the power s witch in the AUTO position, and press the
standby button. The light willextinguish, indicating that
the unit has resumed the normal operating mode.
Step 4
When the unit cycles off, remove the hopper cover,
and place the feed t ube in its original position.
Figure 30
Step 5
Replace the hopper cover.
IMPORTANT: The STANDBY mode must
not be used in lieu of daily disassembly, cleaning,
and sanitizing.
Closing Procedure
To disassemble the freezer, the following items will be
needed:
S T wo cleaning pails
S Sanitized s tainless steel rerun c an with lid
S Necessary brushes (provided with freezer)
S Cleaner
S Single s ervice towels