Filter
Top Products
23
Models 8752, 8756, 8757 Operating Procedures
Step 5
Install the draw valve(s). Slide the two o- rings into the
grooves on the draw valve(s) and lubricate.
Figure 10
Note: The Models 8756 and 8757 have three draw
valves.
Lubricate the inside of the freezer door spout(s), top
and bottom, and insert the draw valve(s) from the
bottom until the slot in the draw valve(s) comes into
view.
Figure 11
Step 6
Install the adjustable draw handle(s). Slide the
o- ring(s) into the groove(s) on the p ivot pin(s) and
lubricate.
Figure 12
Slide the fork of the draw handle(s) in the slot o f the
draw valve(s). Secure with pivot pin.
Note: The Models 8756 and 8757 have three draw
handles and two pivot pins. Slide the fork of the draw
handle in the slot of the draw valve, starting from the
right. Slide the long pivot pin through the right and
middle draw handles. Secure the left draw handle with
the short pivot pin.
Figure 13
Note: These units feature adjustable draw handles to
provide the best portion control, giv ing a better
consistency quality to your product, and controlling
costs. The draw handles can be adjusted for different
flow rates. See page 19 for more information on
adjusting these handles.