Filter
Top Products
41
Models 8752, 8756, 8757 T roubleshooting Guide
PROBLEM PROBABLE CAUSE REMEDY PAGE
REF.
8. Excessive mix leakage
into the rear drip pan.
a. Worn or missing drive
shaft seal.
a. Install or replace the seal. 20/ 43
b. Improper lubrication of the
drive shaft.
b. Lubricate properly. 20
c. W orn rear shell bearing. c. Contact a service
technician to replace the
rear shell bearing.
---
d. The gear box is out of
alignment.
d. Contact a service
technician to align the
gear box.
---
9. The drive shaft is stuck in
the gear box coupling.
a. The gear box is out of
alignment.
a. Contact a service
technician to align the
gear box.
---
b. Rounded corners on hex
end of drive shaft or gear
coupling.
b. Replace damaged
component.
---
10. Freezing cylinder walls are
scored.
a. Broken pins on beater
assembly.
a. Repair or replace the
beater assembly. Be sure
the scraper blades are
properly seated on pins.
21
b. The beater assembly is
bent.
b. Repair or replace the
beater assembly. Contact
a service technician to
correct the cause of
insufficient mix in freezing
cylinder.
---
c. Missing front bearing. c. Install the front bearing on
the back of the freezer
door.
22