Filter
Top Products
21
Models C708 & C716 Important: To the Operator
050628
The AUTO HEAT TIME screen allows the M anager
to set the time of day in which the heat treatment
cycle will start.
AUTO HEAT TIME
00:00
Change
>Exit
To set the AUTO HEAT TIME, touch the UP arrow
symbol to move the arrow to “Change”. Then touch
the SEL symbol. The screen will display the time
with the cursor under the hour position.
AUTO HEAT TIME
00
:00
Touch the ar row symbols to i ncrease or decrease
the hour to the des ired s etting. Then move the
cursor to the minutes position by touching the SEL
symbol. Adjust the setting for minutes. Then touch
the SEL symbol to save the setting and return to the
AUTO HEAT TIME screen. Touch the SEL symbol
to exit the screen and r eturn to the Menu.
The AUTO START TIME option allows the Manager
to set the time of day at which the machine
automatically enters the AUTO mode from the
STANDBY mode. The machine must be in the
STANDBY mode without a freezer lock condition in
order to AUTO start at the programmable time. The
AUTO START TIME can als o be Disabled and
require starting the AUTO mode manually.
AUTO START TIME
DISABLED
Enable
> Disable
Enable the AUTO START TIME by touching the U P
arrow symbol to move the arrow u p to Enable.
Touch the S EL s ymbol to advance to the next
screen.
AUTO START TIME
00:00
Change
>Exit
Program the AUTO START TIME by touching the
UP arrow symbol to move the arrow to “Change”.
Touch the S EL s ymbol to advance to the next
screen.
AUTO START TIME
00
:00
Use the arrow symbols to p rogram the AUTO
START TIME by increasing or decreasing the hour
setting above the cursor. Touch the SEL symbol to
advance the cursor and program the minutes
setting. Touch the SEL s ymbol to return to the
previous screen with the new time setting displayed.
Touch the S EL s ymbol to exit the s creen and return
to the Menu.
The STANDBY option is used to manually plac e the
machine in the s tandby mode during long, no draw
periods. Select the STANDBY screen from the
Manager’s Menu. Touch the SEL s ymbol to ac tivate
Standby. Standby may a lso be entered by touching
the STANDBY key when not in the Manager’s Menu.
Discontinue Standby operation by exiting the
Manager’s Menu and s elect the AUTO mode.
STANDBY MODE
> EXIT
The BRUSH CLEAN CYCLE option allows the
Manager to select the maximum number of days
between brush cleaning the m achine. The b rush
clean cycle may only be c hanged after the freezer
has been m anually c leaned but before it has been
placed in the AUTO or STANDBY mode.