Filter
Top Products
29
Models C708 & C716 Operating Procedures
Model C708 Freezer Door Assembly (Cont’d.)
Step 5
Insert the baffle rod through the beater in the
freezing cylinder. With the door seated on the
freezer studs, install the handscrews, with the longer
ones on top. Tighten equally in a criss-cross pattern
to insure the door is snug. (See Figure 23.)
Figure 2 3
Step 6
Slide the fork of the d raw handle into the slot of the
draw valve. Secure with pivot pin. (See Figure 24.)